XTENIK CATALOG
Eversolo DAC-Z10
DAC / amplifier
Specifications below are limited to verified records in the XTENIK catalog. Technical Match is a deterministic calculation from verified manufacturer data—not an AI guess or subjective opinion.
TECHNICAL MATCH AVAILABLE2 published specifications
PUBLISHED SPECIFICATIONS
Facts used for transparent matching.
- output voltage
- 7 Vrms @ 0 dBFS · 6.35mm single-ended headphone output, manually selected HIGH GAIN. Official launch specification rates maximum output at 1 W into 32 ohms (also 1 W into 16 ohms); manual printed page 14 specifies 7 Vrms at 0 dBFS in high gain. Manual page 21 permits selecting gain; auto/low/mid gain and RCA/XLR line outputs are excluded. Recommended high-gain headphone impedance is 32-300 ohms; this is a recommendation, not a published absolute minimum-load limit. Output impedance is unknown.
- output power
- 1000 mW at 32 ohms · 6.35mm single-ended headphone output, manually selected HIGH GAIN. Official launch specification rates maximum output at 1 W into 32 ohms (also 1 W into 16 ohms); manual printed page 14 specifies 7 Vrms at 0 dBFS in high gain. Manual page 21 permits selecting gain; auto/low/mid gain and RCA/XLR line outputs are excluded. Recommended high-gain headphone impedance is 32-300 ohms; this is a recommendation, not a published absolute minimum-load limit. Output impedance is unknown.
Only verified specifications are shown here. Bounds and derived values retain their provenance in the calculation workflow. Use Technical Match to test this product with another device or output.